Water Based Interior Paint Water Based Exterior Paint Adhesives and Mastics Thinner Assistant Products
Industrial Synthetic Wood Water Proof

Water Based Exterior Paint

  • Aura Acrylic Exterior Paint
  • Aura Silicone Exterior Paint
  • Kardelen Acrylic Exterior Paint
  • Kardelen Acrylic Exterior Priming Coat
  • Kardelen Acrylic Textured Paint
  • Kardelen Silicone Based Textured Paint
  • Kardelen Silicone-Based Exterior Paint
  • Kardelen Silicone-Based Exterior Priming Coat

    • Kardelen Silicone-Based Exterior Paint

    PLACES OF USE

    This product is used on the surfaces like conventional plastering, gross concrete, brick, dragged concrete, ytong, mineral, etc.

    QUALITIES

    It has a high resistancy to moisture for its water based formula, acrylic binders and special silicone. It also has a high covering intensity and respiration ability sticks to the surface. It doesn’t change color for its special color pigments. It is easy to use on insulation systems, economical and easy to paint because of its high spreading feature. It saves time and effort and durable against air conditions and fractions.

    TECHNICAL FEATURES OF THE PRODUCT

    * Appearance: Matte, flat paint * Chemical structure: acrylic copolymer emulsion

    * Density: 1,62 gr/cm3 * Viscosity: 120 KU – 125 KU 25°C * Thinner: water * Ph: 8-9

    *Solid matter ratio: %70- %72 * Recommended application: 2 or 3 coats (depending on the purity and smoothness of the surface)

    * Flash time: till hard flash max. 24 hours, min. wait between coats 2 hours * Scrubbing: over 300 circuits/min.

    APPLICATION

    The surface should be strong, dry and cleansed from contaminants before Kardelen silicone facade paint is applied. Kardelen facade priming coat is recommended on old surfaces after the necessary preparation is done and surfaces to be pianted for the first time. So that the adherence increases and saves paint. To aviod tone changes on wide surfaces, material should be thinned with the same amount of water, mixed carefully and applied without waiting. During the application, surface and environment heat should be +5°C and – 30°C.

    THINNING

    Clean, purified water can be used to thin for %10 – %25 depending on condition of the surface and the mix is recommended to be used as two coats.

    SURFACE WIDTH CAN BE APPLIED

    1kg Kardelen silicone plastic paint can cover 6 – 8 m² area depending on the absorbity of the surface. 1lt Kardelen plastic paint can cover 9-11 m² area.

    STORING

    It can be kept for 2 years away from direct sunlight and in cool with its top covered.

    Packs: 3,5 kg, 20 kg plastic bucket.

    Colours: Kardelen facade paint color chart.

    Standards: TSE 5808